Integrally reinforced contoured branch connections. Available in all material grades and wall thicknesses. Additionally complies with MSS-SP-97 and B16.11 (Classes 3000, 6000, and 9000).
Integrally reinforced branch connections for installation on straight runs or elbows. Available in butt-weld, socket-weld, and threaded configurations. Special designs also available.
Integrally reinforced contoured branch connection in outlet sizes from 1/4" to 60". Available in all material grades and wall thicknesses. Additionally complies with MSS-SP-97 and B16.9.
Integrally reinforced branch connection of one piece construction which eliminates costly welds and provides convenient attachment of socket-weld and threaded valves and instruments. Available in standard lengths of 3-1/2" and 6-1/2". Special lengths on request.
Integrally reinforced branch connection designed for use where branch pipe is larger than run pipe. Eliminates bull head tees or standard tees in combination with concentric reducers.
Integrally reinforced branch connections for use on Sch 5s & 10s stainless pipe. Designed to minimize pipe distortion caused by welding and to reduce installation time. Available in butt-weld, threaded and socket-weld.
Weld on, integrally reinforced threaded (Class 3000 and Class 6000) and flanged (Class 150 thru Class 2500) branch connection for thermowells in heavily insulated pipes.
Forged flanged integrally reinforced outlet fitting available in Class 150 thru Class 2500 flange ratings. May be specified in any combination flange type, run size and branch size. Reduces welding and installation time. Available in all material grades. Also available in hot tap, lateral and elbow configurations.
Integrally reinforced, contoured-insert type branch connection ideally suited for cyclical and for high pressure/temperature services. Patented circular design reduces weld volume, permits automatic welding and lends itself to Non-Desctructive Examination. Available in butt-weld, socket-weld, threaded, and flanged configuratons.
Integrally reinforced, contoured-insert type branch connection ideally suited for cyclical and for high pressure/temperature services. Patented design reduces weld volume and lends itself to Non-Destructive Examination. Available in butt-weld, socket-weld, threaded, and flanged configurations.
Design provides special internal reinforcement at critical stress concentration areas. Available as concentric and eccentric in all material grades. All end finishes and special reductions are available. Complies to MSS-SP95.
Integrally reinforced contoured-insert type branch connections, threaded (Class 3000 and Class 6000) and flanged (Class 150 thru Class 2500) for thermowells in heavily insulated pipes. Moves attachment weld away from instrument top. Patented design reduces weld volume, permits automatic welding and lends itself to Non-Destructive Examination.
A traditional insert welding outlet contoured to fit the inside diameter of the run pipe vessel wall. Available in butt-weld and flanged configurations.
A weld-on connection in Class 3000 and Class 6000 ratings in socket-weld, threaded or combination threaded and socket-weld designs. Manufactured to your standards or one of our forty different designs.
Special support nozzle designed to reduce flow induced vibrations. Engineered for temperature, pressure and flow conditions. Also considers fatigue and is designed to accommodate stresses induced from opening and closing of the valve and seismic conditions.
A contoured-insert Vesselet with a butt-weld projection inside the vessel for through-the-wall piping service. Projection ends are beveled for easy welding and for Non-Destructive Examination.
Designed for mating flanges to vessels or tanks utilizing a contoured insert type connection. Available in all flange sizes and pressure ratings. Patented design reduces weld volume, permits automatic welding and lends itself to Non-Destructive Examination.
Designed for mating flanges to vessels or tanks economically. Manufactured for either I.D. or O.D. installation. Available in all flange sizes and pressure ratings. Provides the strength and safety the vessel code requires.
Olets manufactured in materials such as: 304, 304L, 316, 316L, 321, 347, 317, 6% Moly, Duplex, A400, A600, A625, A800, A800H, A800HT, A825, Hastelloy, Aluminum, 70-30 Cu-Ni, 90-10 Cu-Ni, Super Duplex
View our Olets
Intro & Specs
Screws, Insulation, Nuts,
Washers, Gaskets, etc.
800-666-0088 • Buffalo, NY (HQ)
800-777-2008 • Chicago, IL
800-777-0820 • Cleveland, OH
800-777-1858 • Cranbury, NJ
800-777-2008 • Greenville, WI
800-777-0510 • Indianapolis, IN
800-725-1839 • Los Angeles, CA
800-565-5525 • Raleigh/Durham, NC
800-777-2260 • Salt Lake City, UT
800-777-1355 • Stockton, CA
800-666-0088 • Tavenier, FL
The contents of this website are presented for information purposes only, and while effort has been made to ensure their accuracy, they are not to be contrived as warranties or guarantees, expressed or implied, regarding the products or services described herein or their use or applicability. All sales are governed by our terms and conditions, which are available on request. We reserve the right to modify or improve the designs or specifications of our products at any time without notice. Always verify that you have the most recent product specifications or other documentation prior to the installation of these products.
©2018 Robert-James Sales, Inc.